Araldite is a registered trademark of Huntsman Advanced Materials (previously part of Ciba-Geigy) referring to their range of engineering and structural epoxy, acrylic, and polyurethane adhesives. Swiss manufacturers originally launched Araldite DIY adhesive products in 1946. The first batches of Araldite epoxy resins, for which the brand is best known, were made in Duxford, England in 1950. [1] Araldite® Rapid is a strong 2-component epoxy with fast setting. Parts repositionable for 4 minutes. High temperature resistance (-30°C to 80°C). Oil, chemical and impact resistant.

Epoxy Chemistry - Understanding WEST SYSTEM Marine-Grade Epoxy". WEST SYSTEM . Retrieved 2021-03-19. H315 Causes skin irritation.H317 May cause an allergic skin reaction.H319 Causes serious eye irritation.H411 Toxic to aquatic life with long lasting effects. P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.P264 Wash … thoroughly after handling.P273 Avoid release to the environment.P280 Wear protective gloves/protective clothing/eye protection/face protection.P332 + P313 If skin irritation occurs: Get medical advice/ attention.P391 Collect spillage.The Araldite Standard Tubes is a strong, two-part general purpose adhesive, which provides a long-lasting bond for almost any material. It is ideal for projects like complicated, heavy-duty work on metals, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, card, fabrics, rubber and many plastics.

Despite a widespread myth, Araldite was not used in the production of the De Havilland Mosquito aircraft in the 1940s. Another Aero Research Limited glue was used, called Aerolite, which was not an epoxy resin, but a gap-filling urea-formaldehyde adhesive. For maximum working time, mix in small quantities. Large quantities accelerate the curing process and reduce working time. Do not apply undue strain to bond for 6-8 hours. Hold join in place using tapes or weights if necessary. Maximum strength reached after 24-72 hours. Schlösser Metallbau, a manufacturer of metal parts for railway carriages, uses Araldite epoxy resin to bond aluminium profiles of cab doorframes on the DBAG Class 423 Siemens Bombardier train. [7] The use of Araldite adhesive in architecture to bond thin joints of pre-cast concrete units was pioneered by Ove Arup in Coventry cathedral and the Sydney Opera House. [4] At Coventry cathedral, Araldite adhesive was used to bond its columns and fins, while at Sydney Opera House, Araldite adhesive was used to bond the rib sections of the shells, since a traditional concrete joint would have slowed construction, as it would need 24 hours to cure before stressing. [5]When using the tube variant, ensure you replace the correct cap on the correct tube. Placing the wrong cap on the wrong tube will cause the tube to harden. Caps and tubes are colour coded to help. The Araldite Rapid Steel Tubes is a strong, two-part general purpose adhesive, which provides a long-lasting bond for almost any material. It is ideal for projects like complicated, heavy-duty work on metals, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, card, fabrics, rubber and many plastics. Reaction mass of 2,2'-[methylenebis(2,1-phenyleneoxymethylene)]bis(oxirane) and 2,2'[methylenebis(4,1-phenyleneoxymethylene)]bis(oxirane) and 2-({2-[4-(oxiran-2 ylmethoxy)benzyl]phenoxy}methyl)oxirane. Aero Research Limited (ARL), founded in the UK in 1934, developed a new synthetic-resin adhesive for bonding metals, glass, porcelain, china and other materials. The name "Araldite" recalls the ARL brand: ARaLdite. Araldite Adhesive of Choice". EPPM Magazine. 5 (3). April 2003. Archived from the original on 2008-01-13.

Place cap from plunger on nozzle for storage. Clean up uncured Araldite with acetone (nail polish remover). To extend product life replace caps immediately after use. Ensure you wipe excess from nozzle with a tissue dipped in acetone (or nail polish remover) before replacing cap.Dispense equal parts of both liquids onto a clean disposable surface and mix both parts together thoroughly. Leave for 5-10 minutes and mix again before applying. The mixed glue will remain usable for 1 hours at 20°C. Highmark Manufacturing uses Araldite epoxy resin in the manufacture of advanced ballistic protection body armour. [6]

To remove product after cure, mechanical action (scraping or sanding) is recommended. Since the product is chemically resistant solvent will NOT dissolve this product. Armour uses Araldite". The Engineer Online. 15 January 2000. Archived from the original on 12 September 2012.

Simulate your adhesive joints with ARALDITE® 2014-2

Araldite adhesive sets by the interaction of an epoxy resin with a hardener. Mixing an epoxy resin and hardener together starts a chemical reaction that produces heat - an exothermic reaction. [2] It has a strong, long-lasting, solvent-free adhesive which is water-resistant and can be painted or sanded. Features & Benefits: Seymour, Raymond B. (April 1981). "History of the Development and Growth of Thermosetting Polymers". Journal of Macromolecular Science, Part A. 15 (6): 1165–1171. doi: 10.1080/00222338108066459. Hayat, M. A. (2000). Principles and Techniques of Electron Microscopy: Biological Applications. Cambridge University Press. p.98. ISBN 0-521-63287-0.