For a thin piece of plastic that isn't exceptionally long (in fact it's quite short at about 31cm), it's deceiving in appearance. A surprisingly effective mudguard for days and rides when you may not have full guards fitted.

The holes for the fork brace aren't ideally located when using it as a rear mudguard, so we built in two snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays, this feature creates more mud / tyre clearance and a much better fit. Our widely acclaimed Seal Shield offers greater protection for your fork seals from high velocity mud and spray lengthening service intervals MATERIAL If you wish to return your bike to us please keep it in the box it arrived in and call us on 01772 644340 and we will arrange a collection. The best guards are the longest and work at all speeds. If you’re riding slowly, mud comes off the trailing edge of the tyre and is thrown upwards, but as speed increases it’s thrown further forward and you eventually ride into this spray. Having a mudguard that covers the full arc of mud trajectory is the best option. Align the ENDUROGUARD and do up all the cable ties real tight with fat pliers (remember cable ties don’t scratch forks, loose cable ties do!)

long 24g (without cable ties) MAIN DISTRIBUTORS UK EXTRA UK FRANCE TRIBE SPORT GROUP NORWAY DELER AS REST OF EU NOW COMPANY USA AND CANADA RECIPROCATORS Indent to create 4mm of additional tyre clearance (also fits the large raised brace on the Merida e-bike) INSPECT BEFORE YOU RIDE: DO NOT USE IF DAMAGED IN ANY WAY AS CONTINUED USE MAY LEAD TO FAILURE OR INJURY You have a choice of snap-off holes for the front fork brace, narrow holes for normal forks and if needed wider holes for BOOST forks

The RearGuard is simply a 'game changer' in the last minute fast fitting REAR mudguard field, nothing is as secure. It attaches underneath the saddle with a hook and loop strap and takes less than 20 seconds to fit. COMPATIBILITY WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre FORKS: All forks including Boost forks (except reverse arch) TRAVEL: Any travel The ProGuard Rear Standard offers an additional 83mm on the rear coverage and 140mm additional length at the front. The material at the front of the guard is made using a slightly thinner material so it can be trimmed to optimise the fit to your specific bike. RRP ProGuard Rear MudGuard Features RapidRacerProducts Ltd accepts no liability for any damage or injury caused due to improper fitting or use of our products

We have tested the following chemicals to use on our ProGuards to keep them looking great and shedding mud: You’d think it’d be easy to make a good mudguard. Turns out that’s not that case. There’s few than half a dozen brands that do it properly. Crud Products XL Front Fender 6. Crud Products XL Front Fender Pricey but worth it if you need to remove/attach frequently